ET2
472 lighting stylesTrade pricing availableExpert product help

ET2

ET2 Contemporary Lighting, based in City of Industry, California, builds integrated-LED fixtures for kitchens, baths, hallways, galleries and facades. Use this page to light a whole project from one maker: pendants and ring chandeliers over tables and islands, bath bars, picture lights, flush mounts, 24V Continuum track and...

We curate ET2 by where the light goes and what it has to do: pick the fixture type, then the size and finish that suit your room.

Shop all ET2Planning help
ET2 at MetropolitanDecor

Lighting planning guide

Standard placement rules that make any fixture look right. Each product page gives its exact dimensions.

WhereRule of thumb
Pendant over a dining tableBottom of shade 30–36 in (76–91 cm) above the tabletop; fixture about half to two-thirds the table width
Pendants over an island30–36 in (76–91 cm) above the counter; space them about 24–30 in (61–76 cm) apart
Chandelier sizeRoom length + width in feet = a good diameter in inches
Wall sconcesCenter about 60–66 in (152–168 cm) above the floor
Table and floor lampsBottom of the shade near eye level when seated

Where ET2 works

Homes

Dining rooms, kitchens, living rooms and bedrooms that need both task and mood light.

Hospitality

Restaurants, hotels and lobbies where fixtures set the tone of the room.

Offices and retail

Meeting rooms, reception areas and shops that need light with presence.

Ordering and delivery

Clear availability

Every ET2 page shows current availability and shipping time before you check out.

Help before you buy

Ask us about sizes, finishes and fit for your space. We answer before your order is placed.

Trade and projects

Designers, architects and hospitality buyers can open a MetropolitanDecor trade account for project pricing.

ET2 questions

How do I choose the right size of ET2 fixture?

Use the planning guide above, then check the dimensions on the product page. Ask us with your room and table sizes and we will help you choose.

Are bulbs included with ET2 lights?

It depends on the fixture. Each product page lists the light source, bulb type and whether the bulb is included.

Can I use ET2 lighting in a commercial project?

Many fixtures suit restaurants, hotels and offices. Check the product page for ratings and listings, and ask us about quantities and trade pricing.

How long does delivery take?

Each product page shows current availability and shipping time. Made-to-order pieces show their lead time before checkout.

ET2 Contemporary Lighting, based in City of Industry, California, builds integrated-LED fixtures for kitchens, baths, hallways, galleries and facades. Use this page to light a whole project from one maker: pendants and ring chandeliers over tables and islands, bath bars, picture lights, flush mounts, 24V Continuum track and Alumilux outdoor aluminum, in matching finishes.

Planning a room with ET2

ET2 fixtures are built around integrated LED, so most pages list delivered lumens, color temperature, CRI and the dimmer types the driver accepts. That makes it straightforward to mix families in one scheme: pick a statement piece for the main zone, then carry the same finish into sconces, flush mounts and track so the room reads as one design. Many sconces and bath lights are ADA compliant and damp or wet rated, which matters in hallways, baths and covered patios.

Shop by room and use

Frequently asked questions

Do ET2 fixtures need bulbs?

Most ET2 fixtures have integrated LED, so there is no bulb to buy. The few socketed models, such as Pullman with its GU10 lamp, say so on the product page, along with whether the lamp is included.

Which ET2 lights work with my dimmer?

Each product page lists the dimming types the fixture accepts, for example Triac, ELV or 0-10V. Send us your dimmer model and we will confirm the match before you order.

Can I choose the color temperature?

Families marked 5CCT, such as Groove, Chimes 5CCT and Latitudes, let you select from 2700K to 5000K at the fixture. WiZ versions of Groove and Chimes are smart fixtures with tunable white controlled from an app.

How does the Continuum track system go together?

Continuum is a 24V track system. Each run needs a rail, a driver (on-track plug-in or remote hard-wired) and the heads you want: spots, flat and optic lights, wall washers or track pendants. Connectors join rails in line, at corners, in T and X layouts, or from wall to ceiling.

Which ET2 lights can go outdoors?

The Alumilux family, Steppes and Cubed are wet rated for exposed walls, steps and landscape. Each product page lists its location rating, and several bath sconces and pendants are damp rated for covered porches and bathrooms.

Can you help with a larger residential or commercial project?

Yes. Our trade team helps designers, contractors and property managers choose sizes, finishes and quantities across rooms and order everything for one project together.