Brik LED Square Aluminum Wall Sconce, Up and Down, Wet Rated, 11.75 in, by ET2

The ET2 Brik is a low-profile aluminum LED sconce that washes light up and down, 11.75 in tall and only 1.5 in deep. It gives 1400 lumens at 3000K and 90 CRI, runs on 120-277V, and is wet rated and ADA listed, so it works on exposed facades as well as in halls.

Two built-in LEDs light the wall above and below the block, and the clean aluminum body suits both exterior and interior walls. The sconce is 11.75 x 7 in, weighs 3.3 lb and projects just 1.5 in, which makes it practical beside entries and along walkways. Dimming is Triac or ELV at 120V. Black is the sharp choice for Modern and Industrial fronts, White blends into plaster and Scandinavian rooms, and Natural Aged Brass warms a Transitional entry.

Details and dimensions

• Brand: ET2
• Model: Brik Wall Sconce
• Style: Modern, Industrial, Scandinavian
• Lights: 2
• Dimensions: 11.75 x 7 in (29.8 x 17.8 cm), W x H
• Projection from wall: 1.5 in (3.8 cm)
• Lead wire: 8 in (20.3 cm)
• Finishes: Black, Natural Aged Brass, White
• Material: Aluminum
• Light source: Integrated LED, included, 25,000 hour rated life
• Wattage: 28W total (2 x 14W)
• Light output: 1,400 delivered lumens (1,960 rated)
• Color temperature: 3000K, CRI 90
• Voltage: 120-277V input, 12-40V output
• Dimming: Triac or ELV at 120V
• Light direction: Up&Down
• Mounting: Down
• Location rating: Wet
• ADA compliant: Yes
• Certification: cETLus
• Net weight: 3.3 lb (1.5 kg)
• Packed weight: 3.96 lb (1.8 kg)
• Item numbers (MPN): E23211-BK, E23211-WT, E23211-NAB
• Delivery: Ships in 3 to 5 business days.

Where it works best

Place Brik on each side of a front door, beside a garage or along a patio wall, where the up and down pattern frames the entry. Indoors, it works in stairwells and corridors where depth is limited. Match the finish to door hardware and house numbers for a tidy exterior scheme.

Who this is not for

Brik is a compact up and down fixture, so it does not throw a long beam to light a yard or a driveway. The LED is integrated and cannot be swapped. At 1400 lumens it can be bright for a small bedroom, so use a dimmer at 120V.

Why we carry ET2

Brik is one of the few ADA listed sconces in this range that is also wet rated. That makes it a flexible choice for commercial and residential entries.

Care and installation

Rinse dust off the aluminum with water if needed and wipe it dry with a soft cloth. A qualified electrician should install it, which ET2 recommends for outdoor walls. Assembly sheet: E23211 (PDF).

Planning files: ET2 spec sheet for your submittal: E23211.

Frequently asked questions

Can Brik be used outdoors?

Yes, it is wet rated, so it can be installed on exposed exterior walls. It is also fine inside, which lets you match indoor and outdoor lighting.

How high should Brik be mounted by a front door?

Set the center at about 60 to 66 in above the ground or landing. Keep it a few inches from the door casing so the light is not blocked.

Is Brik ADA compliant?

Yes, it is listed as ADA compliant, with only a 1.5 in projection from the wall. Check your local code for the mounting height on accessible routes.

What dimmers work with Brik?

Dimming is Triac or ELV when the fixture runs at 120V. On 277V circuits, confirm the control method with your electrician before you wire it.

Which direction does the light go?

The light goes both up and down, with the wash falling on the wall above and below the block. Space the fixtures to avoid hot spots.

How bright is Brik?

It produces 1400 lumens at 3000K with 90 CRI, using 14 watts. That is bright enough for an entry or walkway wall and can be dimmed down.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.