Nora Lighting Under Cabinet & Tape Lighting

We have curated lighting since 2009 and carry Nora Lighting under cabinet and tape lighting for kitchens, cabinetry, shelving and coves. Every page lists the matching Nora cables, cords and connectors, flags when a low voltage driver is needed, and links the spec sheet near the top. We list only what Nora has in stock, refreshed weekly.

Shop Nora track lighting by type

How to plan under cabinet lighting

  1. Measure each cabinet; choose fixtures 2 to 4 inches shorter than the inside width, or tape cut to length.
  2. Decide power: 120V fixtures plug in or hardwire; puck lights and tape need a 12V or 24V Nora driver.
  3. Add the jumper cables, cords and connectors listed on each product page.
  4. Pick the color temperature and finish, then check the spec sheet for the maximum run.

Also from Nora: Nora Lighting Recessed Lighting and Nora Lighting Track Lighting.

Frequently asked questions

Do I need a driver for Nora under cabinet lighting?

120V fixtures (LEDUR, Bravo, lightbar, NULS) do not. 12V/24V puck lights and 24V tape light need a Nora LED driver, sold separately.

How do I link several under cabinet lights?

Use the matching Nora jumper cables or end-to-end connectors listed on each fixture page, and stay within the maximum run shown on the spec sheet.

What length should I buy?

Choose a fixture about 2 to 4 inches shorter than the inside width of the cabinet and mount it toward the front edge (our advice).

Where are dimensions and cut points?

Every product page links Nora's spec sheet near the top.

Do you sell in contractor quantities?

Yes. We list only items Nora has in stock, refresh stock weekly, and welcome project orders.