Tether Suspended Ring Wall Sconce, Natural Aged Brass, LED, 20.75 in, by ET2

The ET2 Tether is a Natural Aged Brass LED wall sconce that hangs brass rings from straps, 20.75 in tall and 11.75 in wide. Hidden LEDs give 350 lumens at 3000K and 90 CRI, with light cast onto the neighboring rings and the wall above and below.

The rings hold concealed LEDs, so the light is indirect and the sconce reads as an object on the wall even when it is dimmed. It runs on 120V and dims with ELV or Triac. It projects 5 in, so it needs wall space beside a bed, a console or a stair. The steel construction weighs 3.3 lb. Natural Aged Brass suits Transitional and Modern rooms with warm woods, and the rated life is 50,000 hours.

Details and dimensions

• Brand: ET2
• Model: Tether Wall Sconce
• Style: Modern, Transitional
• Lights: 1
• Dimensions: 11.75 x 20.75 in (29.8 x 52.7 cm), L x H
• Projection from wall: 5 in (12.7 cm)
• Backplate: 5.75 in (14.6 cm) wide x 5.75 in (14.6 cm) high
• Lead wire: 13.25 in (33.7 cm)
• Finishes: Natural Aged Brass
• Glass or shade: Silicon Tape
• Material: Steel
• Light source: Integrated LED, included, 50,000 hour rated life
• Wattage: 11.6W
• Light output: 350 lumens
• Color temperature: 3000K, CRI 90
• Voltage: 120V input, 24V output
• Dimming: ELV or Triac
• Light direction: Down
• Mounting: Down
• Location rating: Dry
• Certification: cETLus
• Net weight: 3.3 lb (1.5 kg)
• Packed weight: 5.3 lb (2.4 kg)
• Item numbers (MPN): E24080-NAB
• Delivery: Ships in 3 to 5 business days.

Where it works best

Hang a pair on either side of a bed or a mirror, or use one beside a stairwell landing or an entry console. It gives a gentle glow, not task light. Add a table lamp or overhead light for reading or work. Keep the 5.75 in square backplate centered on the box and leave about 12 in of clear wall on each side.

Who this is not for

It is rated for dry locations, so it belongs indoors and not in a bathroom or porch. The LED is built in and the output is 350 lumens, so it will not serve as a main light. The projection of 5 in is not ADA compliant, so avoid corridors that require it.

Why we carry ET2

Tether gives a wall a sculpted piece that also lights, and its brass finish pairs with wood and leather. It is the sconce we suggest for a bedroom or entry that needs character more than glare.

Care and installation

Dust with a soft, dry cloth and avoid polishes on the brass finish. ET2 recommends installation by a qualified electrician. Assembly sheet: E24080-NAB (PDF).

Planning files: ET2 spec sheet for your submittal: E24080.

Frequently asked questions

How far does Tether project from the wall?

It projects 5 in, with a 5.75 in square backplate. Leave clearance if it goes beside a doorway or at the end of a bed.

Is it bright enough for reading?

No. It gives 350 lumens of soft, indirect light, so use it for ambiance and pair it with a lamp or overhead light for reading.

Can I use it in a bathroom?

No. The Tether is rated for dry locations only, so keep it to bedrooms, living rooms, halls and entries rather than humid rooms.

Does it dim?

Yes. It dims on ELV or Triac dimmers at 120V, which lets you drop the glow low at night. Test the low end before the wall is closed.

How tall is it?

The fixture is 20.75 in tall and 11.75 in wide. Center it at about 60 in above the floor beside a bed or entry.

Can I replace the LED?

No. The LED is integrated and rated for 50,000 hours, so there is no bulb to change. Plan on the sconce as a complete unit.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.