Tether LED Ring Pendant, 3 Leather-Strap Rings, Natural Aged Brass, by ET2

The ET2 Tether LED Pendant hangs three tapered brass rings from leather straps on a 34.25 in linear canopy, so it spans a dining table or kitchen island with one hookup. The concealed LEDs give 1790 lumens of 3000K indirect light, pushed up toward the ceiling and down toward the surface below.

Each ring hides its LED source, so you see the finish and the strap rather than a bright point of light. Light spills onto the neighboring rings and the ceiling above, which lifts the whole zone without glare at seated eye level. The fixture is 34.25 in long and 19.75 in tall on a 72 in cord, with an overall height from 49.25 to 83 in. The Natural Aged Brass finish warms Transitional kitchens and dining rooms, and the leather ties it to Modern spaces that mix wood, stone and metal.

Details and dimensions

• Brand: ET2
• Model: Tether Multi-Light Pendant
• Style: Transitional, Modern
• Lights: 3
• Dimensions: 34.25 x 9 x 19.75 in (87 x 22.9 x 50.2 cm), L x W x H
• Overall height: 49.25 in (125.1 cm) minimum to 83 in (210.8 cm) maximum
• Cord: 72 in (182.9 cm)
• Canopy: 34.25 x 9 in, 1.5 in deep
• Finishes: Natural Aged Brass
• Glass or shade: Silicon Tape
• Material: Steel
• Light source: Integrated LED, included, 50,000 hour rated life
• Wattage: 60W
• Light output: 1,790 delivered lumens (2,380 rated)
• Color temperature: 3000K, CRI 90
• Voltage: 120V input, 24V output
• Dimming: ELV or Triac
• Location rating: Dry
• Certification: cETLus
• Net weight: 23.1 lb (10.5 kg)
• Packed weight: 29.1 lb (13.2 kg)
• Item numbers (MPN): E24083-NAB
• Delivery: Ships in 3 to 5 business days.

Where it works best

Center it over a rectangular dining table or a kitchen island, with the bottom of the rings roughly 30 to 36 in above the surface. It also works over a console in an entry or above a reception desk in a hotel or office. Match the brass with cabinet pulls or faucet finishes, and keep nearby fixtures simple so the leather and ring detail stands out.

Who this is not for

This fixture is for dry indoor locations only. At 23.1 lb it needs a ceiling box rated for the weight, and the 34.25 in linear canopy needs flat mounting space. The LED is integrated and cannot be replaced, and the light is indirect, so add task lighting where you need bright light for prep work.

Why we carry ET2

Tether is a useful piece for tables and islands where a round pendant would be too small. The three rings spread light along the length of the surface, and the leather-strap detail is a quiet way to add texture to a brass scheme.

Care and installation

Dust the rings with a soft dry cloth and keep abrasive cleaners off the brass finish. Wipe the leather gently and keep it dry. ET2 recommends that a qualified electrician install the fixture. Assembly sheet: E24083 (PDF).

Planning files: ET2 spec sheet for your submittal: E24083.

Frequently asked questions

How long a table does the Tether suit?

The fixture is 34.25 in long, so it suits a table or island roughly 5 to 7 ft long. Keep the fixture at least 12 in shorter than the table on each end so it feels in proportion.

How low can I hang it over a kitchen island?

Leave about 30 to 36 in between the counter and the bottom of the rings. The cord is 72 in and the overall height runs from 49.25 to 83 in, so the drop can be set on site.

Does it give enough light for the kitchen?

It delivers 1790 lumens at 60 watts, and the light is indirect. That suits ambient and accent use, so pair it with under-cabinet or recessed task lights for chopping and cooking.

What dimmer should I use?

The fixture dims with ELV or Triac dimmers at 120V. Check the dimmer rating against the 60 watt load and test low-end performance after installation.

Is the leather suitable for a kitchen?

The fixture is rated for dry locations, so it is fine in a normal kitchen away from the stove and sink. Keep it out of any area with steam or grease build-up that could stain the straps.

Can I use it in a restaurant or lobby?

Yes, in dry indoor spaces such as a hotel lounge, a restaurant booth line or a reception desk. Make sure the ceiling can carry 23.1 lb, and plan for a 34.25 in canopy.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.