Serpentine LED Spiral Pendant, 2 Lights, Black Silicone Diffuser, by ET2

The ET2 Serpentine LED Pendant puts 5500 lumens of 3000K light into a 59 in tall spiral, enough to anchor a dining table, a foyer or the open well beside a staircase. The cord is 120 in, so the overall height adjusts from 62 to 152.25 in and the same fixture works in an 8 ft room or a two-story entry.

Two strips of LED tape run through black aluminum channels and spread evenly behind a silicone lens, which keeps the light smooth with no visible dots. The 90 CRI keeps wood, linen and skin tones true. The canopy is 8.25 in wide and fits ceilings sloped up to 15 degrees, and the fixture weighs only 7.4 lb, so it hangs from a standard box. The Black finish suits Modern, Contemporary and Industrial rooms, and it reads as a slim graphic line against pale walls or dark paneling.

Details and dimensions

• Brand: ET2
• Model: Serpentine Multi-Light Pendant
• Style: Modern, Contemporary
• Lights: 2
• Dimensions: 21.25 x 21.25 x 59 in (54 x 54 x 149.9 cm), L x W x H
• Overall height: 62 in (157.5 cm) minimum to 152.25 in (386.7 cm) maximum
• Cord: 120 in (304.8 cm)
• Canopy: 8.25 in, 1.5 in deep
• Sloped ceiling: Up to 15 degrees
• Finishes: Black
• Glass or shade: Silicone
• Material: Aluminum, Steel, Silicone
• Light source: Integrated LED, included, 50,000 hour rated life
• Wattage: 80W total (2 x 40W)
• Light output: 5,500 delivered lumens (6,400 rated)
• Color temperature: 3000K, CRI 90
• Voltage: 120-277V input, 18-40V output
• Dimming: Triac or ELV at 120V
• Location rating: Dry
• Certification: cETLus
• Net weight: 7.4 lb (3.4 kg)
• Packed weight: 19.8 lb (9 kg)
• Item numbers (MPN): E30667-BK
• Delivery: Ships in 3 to 5 business days.

Where it works best

Hang it over a dining table with the bottom 30 to 36 in above the surface, or drop it into a stairwell where a tall, narrow shape fills vertical space. It also suits hotel lobbies, restaurant entries and office reception areas that need a sculptural piece with real output. Pair it with simple recessed or wall lighting so the spiral stays the one focal fixture in the room.

Who this is not for

This fixture carries a dry location rating, so keep it out of bathrooms, covered porches and any damp space. The LED is built in and not replaceable, so there are no bulbs to swap. Dim it with a Triac or ELV dimmer at 120V, and check that the dimmer is rated for the 40 watt load.

Why we carry ET2

ET2 Serpentine is a good example of why we stock the line: 5500 lumens from a 7.4 lb fixture, with 120-277V input that suits both homes and commercial jobs. The long cord makes it easy to specify for tall ceilings.

Care and installation

Switch the power off, then wipe the silicone lens and aluminum channels with a soft, slightly damp cloth. Have a qualified electrician hang and wire it, as ET2 advises. Assembly sheet: E30667 (PDF).

Planning files: ET2 spec sheet for your submittal: E30667.

Frequently asked questions

How high should the Serpentine hang over a dining table?

Leave about 30 to 36 in between the tabletop and the bottom of the spiral. The fixture is 59 in tall and the overall height adjusts from 62 to 152.25 in, so measure the drop from your ceiling before you cut the cord.

Can it go in a stairwell or two-story foyer?

Yes. The 120 in cord gives a longest overall height of 152.25 in, which reaches well down from a high ceiling. Hang it so the lowest point clears the stair path by at least 7 ft, and confirm the ceiling box carries the 7.4 lb weight.

Is it bright enough for a dining room without other lights?

It produces 5500 lumens at 40 watts, which is enough to light a dining table on its own. Add a dimmer so you can lower it for dinner, and consider wall or accent lights if you want a softer layered scheme.

Will it work on a sloped ceiling?

The 8.25 in canopy sits correctly on ceilings sloped up to 15 degrees. On a steeper slope the canopy will not sit flush, so choose a different mount or ask an electrician about an adapter.

What dimmer does it need?

Use a Triac or ELV dimmer at 120V. At higher voltage the fixture accepts 120-277V input, but check the driver and dimmer pairing with your electrician for commercial circuits.

Can I use it in a restaurant or office?

Yes, in dry indoor areas such as dining rooms, lobbies and reception desks. It is cETLus listed, the LED is rated for 50000 hours, and the 120-277V input fits most commercial circuits.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.