Rampart Rectilinear Aluminum Post Light, Up and Down Glow, Black, by ET2

The ET2 Rampart post light is a squared black aluminum housing that shines both up and down, wet rated for driveway piers, gate posts and garden walls. Integrated 3000K LED gives 300 lumens on 6 W, with sharp rectilinear edges that suit Modern architecture.

Sharp metal lines surround the LED housing, and the light escapes above and below, creating a pattern on the post and the ground. The fixture measures 5.5 x 15 in with a 5.5 in projection, and it uses two lights in the listing. It weighs 6.16 lb. Dimming is available, and rated life is 30000 hours. The Matte Black finish complements stone, stucco and painted piers, and it matches the rest of the Rampart family for a consistent exterior.

Details and dimensions

• Brand: ET2
• Model: Rampart Outdoor Pole/Post Mount
• Style: Modern, Minimalist
• Lights: 2
• Dimensions: 5.5 x 15 in (14 x 38.1 cm), W x H
• Projection from wall: 5.5 in (14 cm)
• Lead wire: 120 in (304.8 cm)
• Canopy: 3.5 in, 3.5 in deep
• Finishes: Black
• Material: Aluminum
• Light source: Integrated LED, included, 30,000 hour rated life
• Wattage: 12W total (2 x 6W)
• Light output: 300 delivered lumens (540 rated)
• Color temperature: 3000K, CRI 90
• Voltage: 120V input, 120V output
• Dimming: Y
• Location rating: Wet
• Certification: cETLus
• Net weight: 6.16 lb (2.8 kg)
• Packed weight: 7.04 lb (3.2 kg)
• Item numbers (MPN): E30110-BK
• Delivery: Ships in 3 to 5 business days.

Where it works best

Place one on each pier flanking a driveway or walk, or on a low wall at a courtyard entrance. At 300 lumens, it works as a marker, not a floodlight, so use it with area or wall lighting for the main path. Repeat the same black finish on the house numbers and door hardware to link the exterior.

Who this is not for

It is not a Dark Sky fixture, since it throws light up as well as down. The LED is integrated and sealed, so there is no bulb to replace. With a 5.5 in projection, it needs a pier or post wide enough to carry it, and 300 lumens is not a security level.

Why we carry ET2

Rampart gives gates and piers a clean, geometric light without a bulky lantern. We carry it because its squared lines match wall and pendant versions of the same family.

Care and installation

Wipe the aluminum with a soft damp cloth and mild soap, and clear spider webs from the openings. ET2 recommends a qualified electrician for wiring and servicing. Assembly sheet: E30110 (PDF).

Planning files: ET2 spec sheet for your submittal: E30110.

Frequently asked questions

How high should I mount the Rampart on a pier?

Set it on the top of a pier or post so the housing sits roughly 36 to 48 in above grade, in line with a standard wall cap. The up and down light then reaches the ground and the surface above.

Can the Rampart be used in rain and snow?

Yes. It is rated for wet locations, so it can be left on a post or pier year round, subject to proper sealing of the mount.

Does the Rampart dim?

The listing shows it as dimmable but does not name a dimmer type. Have your electrician choose a compatible LED dimmer and test the low end.

What size is the Rampart post light?

It is 5.5 x 15 in with a 5.5 in projection, weighs 6.16 lb and carries two lights for 300 lumens at 6 W. Check the pier width before ordering.

What should my electrician know before installing the Rampart?

Input is 120V, the canopy measures 3.5 in, and the wire run is listed as 120 in. Confirm the pier or post can hold 6.16 lb and plan conduit for the feed.

Can the Rampart be used on commercial entrances?

Yes. It suits retail driveways, apartment entries and campus gates. Use the same finish across a series of posts for a tidy look.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.