Continuum 96W Remote Hard-Wired Driver for LED Track, Brushed Aluminum, by ET2

The ET2 Continuum 96W Remote Hard-Wired Driver is a direct-wire driver that sits away from the track, for example in a ceiling space or a closet, and powers a Continuum LED track run. It has a Brushed Aluminum finish, accepts 120-277V, supports 0-10V and ELV dimming, and is rated at 96W.

The unit measures 2.2 by 12 by 1.4 in and weighs 1 lb, which makes it easy to hide above a ceiling or in a utility space. Because it is hard-wired and remote, the track itself stays slim and clean, with no driver on view. Continuum track can be extended, connected or cut to fit, and low voltage light sources snap on. The driver is listed for dry locations, so install it indoors where it stays dry and reachable for service.

Details and dimensions

• Brand: ET2
• Model: Continuum - Track LED Track Direct-Wire Driver
• Style: Modern, Minimalist
• Dimensions: 2.2 x 12 x 1.4 in (5.6 x 30.5 x 3.6 cm), L x W x H
• Finishes: Brushed Aluminum
• Material: IV, PVC, PC
• Wattage: 96W
• Voltage: 120-277V input, 24V output
• Dimming: 0-10V, ELV
• Location rating: Dry
• Net weight: 1 lb (0.5 kg)
• Packed weight: 3 lb (1.4 kg)
• Item numbers (MPN): EDHW-2496AL
• Delivery: Ships in 3 to 5 business days.

Where it works best

Use it when you want the track to look as slim as possible, such as in a retail space, a gallery or a modern kitchen with a recessed power feed. Locate the driver within reach of an access panel. Total load must stay within 96W, so plan the number of light heads before the track is cut and mounted.

Who this is not for

This is a driver and does not make light. It is listed for dry locations only, so keep it away from damp spaces. ET2 lists a hard-wired install, which needs an electrician and an access point, so it is not a plug-in option. Do not exceed 96W on the run.

Why we carry ET2

We carry the remote driver because it lets Continuum track disappear into the ceiling line, with the power hidden elsewhere. A wide voltage range and 0-10V dimming make it suitable for commercial projects.

Care and installation

Keep the driver dry and dust free, and wipe only with a dry cloth. A qualified electrician must wire it, as ET2 recommends.

Planning files: ET2 spec sheet for your submittal: EDHW. Setup guides: Continuum track brochure.

Frequently asked questions

How is this different from the on-track driver?

This one is remote and hard-wired, so it sits out of sight while the on-track version sits on the track. Both are rated at 96W.

Where can I mount it?

Mount it in a dry, accessible space such as a ceiling cavity or utility room. It measures 2.2 by 12 by 1.4 in, so it fits in a narrow space.

What dimming does it support?

ET2 lists 0-10V and ELV dimming for this driver. Match your wall control or building system to one of these types, and confirm the minimum load.

What voltage can it use?

It accepts 120-277V, so it works on residential circuits and on commercial 277V lighting circuits, which helps on mixed-use projects.

Can I use it in a bathroom?

The driver is listed for dry locations only, so install it where it will stay dry, such as a ceiling space away from moisture.

How many lights can it run?

The total load on the driver must stay within 96W. Add up the wattage of all the light heads before you finalize the layout.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.