Alumilux Cube Compact Aluminum Up Light Wall Sconce, 4.5 in, by ET2

The ET2 Alumilux Cube is a compact 4.5 in aluminum wall sconce with two up-facing lights, wet rated for exterior and interior walls. It gives 580 lumens of 3000K LED on 5 W, runs on 120 to 277V, and comes in Black or Bronze.

The cube is cast aluminum with a 4.33 in backplate and a 4 in projection. Light is directional and aims up, washing the wall above, and a second light adds to the total of 580 lumens on 5 W. Dimming is Triac, and rated life is 50000 hours. It weighs 2.33 lb and has 8 in of lead wire. The Black finish suits Modern facades, and Bronze suits warm brick and stone, and the compact size fits narrow piers.

Details and dimensions

• Brand: ET2
• Model: Alumilux Cube Wall Sconce
• Style: Modern, Contemporary
• Lights: 2
• Dimensions: 4.5 x 4.5 in (11.4 x 11.4 cm), W x H
• Projection from wall: 4 in (10.2 cm)
• Backplate: 4.33 in (11 cm) wide x 4.33 in (11 cm) high
• Lead wire: 8 in (20.3 cm)
• Finishes: Black, Bronze
• Material: Aluminum
• Light source: Integrated LED, included, 50,000 hour rated life
• Wattage: 5W
• Light output: 580 lumens
• Color temperature: 3000K, CRI 90
• Voltage: 120-277V input, 12-40V output
• Dimming: Triac
• Light direction: Directional
• Mounting: Up
• Location rating: Wet
• ADA compliant: Yes
• Certification: cETLus
• Net weight: 2.33 lb (1.1 kg)
• Packed weight: 2.66 lb (1.2 kg)
• Item numbers (MPN): E41308-BK, E41308-BZ
• Delivery: Ships in 3 to 5 business days.

Where it works best

Place a pair on either side of a door or on a patio wall to wash the stucco above. Use the same finish through your exterior so the cubes match the door hardware and railings. The small size fits tight spaces and narrow piers where a bigger sconce would crowd the opening.

Who this is not for

The light goes up, so it will not light steps below. The LED is integrated, and the 4 in projection is deeper than slim sconces. Output is 580 lumens, so use it as an accent.

Why we carry ET2

Alumilux Cube suits projects that need a small up light with a commercial voltage range. We stock it for the two finishes.

Care and installation

Wipe with a soft damp cloth and mild soap. A qualified electrician should install it, as ET2 recommends. Assembly sheet: E41308 (PDF).

Frequently asked questions

How high should I mount the Alumilux Cube?

Mount it so the center sits about 66 in above the floor, with 18 in or more of clear wall above so the upward light has room to spread.

Can the Alumilux Cube go outside?

Yes. It is rated for wet locations, so exposed outdoor walls, covered porches and dry interior walls are all fine for it.

Does the Alumilux Cube dim?

Yes. Dimming is Triac, so use an LED-rated Triac dimmer and test the low end of the range for flicker or buzzing before you finish.

Which finish should I choose?

Black suits steel, glass and dark siding, and Bronze suits brick, wood and stone. Both finishes use the same 4.5 in body and the same output.

What should my electrician know before installing it?

Input is 120 to 277V, the plate is 4.33 in square and the weight is 2.33 lb. The projection is 4 in, so check clearances.

Is it suitable for commercial use?

Yes. The voltage range, wet rating and 50000 hour life suit retail entries, restaurant patios and hotel walls.

Trade and project orders

Designers, contractors and hospitality buyers can apply for trade pricing and ask us about multiple-unit orders.

Shipping

Ships in 3 to 5 business days.

Please note: Because this item is made to order or specially sourced, it is final sale.